@article { author = {Abdi Chooplou, Chonoor and Ghodsian, Masoud and Vaghefi, Mohammad V and Kazerooni, Sara and Bodaghi, Elnaz}, title = {Experimental Study of Effect of Flow Drop Height on Downstream Bed Topography of Type-A Trapezoidal Piano Key Weir}, journal = {Journal of New Approaches in Water Engineering and Environment}, volume = {1}, number = {1}, pages = {113-124}, year = {2022}, publisher = {Gonbad Kavous University}, issn = {2981-0280}, eissn = {2981-0280}, doi = {10.22034/nawee.2023.345240.1009}, abstract = {Abstract: Predicting the extent of local scouring downstream of hydraulic structures has been one of the topics of interest to researchers in recent years. In this research, downstream scouring of a trapezoidal piano key weir under changes in the hydraulic conditions of the flow and the height of the flow drop passing through the weir in a channel with a length of 10 meters and a width and height of 0.75 and 0.80 meters in the hydraulic laboratory of Water Engineering Group. And hydraulic structures of Tarbiat Modares University of Tehran have been studied. Uniform and non-sticky sediments with an average diameter of 2 mm in length and width of 3 and 0.75 m downstream of the piano key weir were used. All experiments were performed under free flow conditions. The results showed that the maximum occurrence of scour depth with increasing flow drop height is farther away from the weir. The maximum scour depth increases with increasing flow drop height. Scouring in the transverse middle of the bed is less than its walls. Increasing the height of the flow drop is accompanied by more changes in the topography of the bed.}, keywords = {Keywords: Experimental study,Scouring,piano key weir,Free flow,Flow drop height}, title_fa = {مطالعه آزمایشگاهی اثر ارتفاع ریزش جریان بر توپوگرافی بستر پایین دست سرریز کلیدپیانویی ذوزنقه ای شکل نوع A}, abstract_fa = {پیش بینی میزان آبشستگی موضعی در پایین دست سازه های هیدرولیکی از موضوعات مورد توجه محققان در سال‌های اخیر بوده است .در این تحقیق آبشستگی پایین دست سرریز کلیدپیانویی ذوزنقه ای شکل تحت تغییرات شرایط هیدرولیکی جریان و ارتفاع ریزش جریان عبوری از سرریز به صورت آزمایشگاهی در کانالی به طول 10 متر و عرض و ارتفاع 75/0 و 80/0 متر در آزمایشگاه هیدرولیک گروه مهندسی آب و سازه های هیدرولیکی، دانشگاه تربیت مدرس تهران بررسی شده است. از رسوبات یکنواخت و غیر چسبنده با قطر متوسط 2 میلی متر به طول و عرض 3 و 75/0 متر در پایین دست سرریز کلیدپیانویی استفاده شد. تمامی آزمایش ها در شرایط جریان آزاد انجام گردید. نتایج نشان داد که محل رخداد بیشینه عمق آبشستگی با افزایش ارتفاع ریزش جریان، در فاصله دورتری از سرریز قرار می گیرد. بیشینه عمق آبشستگی با افزایش ارتفاع ریزش جریان، افزایش می یابد. آبشستگی در میانه عرضی بستر کمتر از جداره‌ها آن می شود. افزایش ارتفاع ریزش جریان همراه با تغییرات بیشتری در توپوگرافی بستر می باشد.}, keywords_fa = {مطالعه آزمایشگاهی,آبشستگی,سرریز کلیدپیانویی,جریان آزاد,ارتفاع ریزش جریان}, url = {https://nawee.gonbad.ac.ir/article_167693.html}, eprint = {https://nawee.gonbad.ac.ir/article_167693_f0c15f6a24d783757c8e8e63bffa1bff.pdf} }